KAM DK-93 Table Press

KAM DK-93 Table Press

Home/Home/Sewing & Quilting/Notions/Fastening tools/KAM Snaps & Pliers
C$100.00
Add awl (plastic handle)
Add Die Set
Please choose
Add ZYT adapter (to allow use of ZYT die sets)
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Have questions?
Share this product with your friends
ShareSharePin it
KAM DK-93 Table Press
Home/Home/Sewing & Quilting/Notions/Fastening tools/KAM Snaps & Pliers
Product Details
Availability: Preorder - dispatch usually 2-4 weeks
Condition: New

Our KAM DK-93 Table Press is a workhorse in the workroom, and with a longer handle and greater throat space, installing hardware will be a breeze over using hand pliers. You'll be setting snaps, grommets or rivets in a jiffy, just to name but a few things you can do with this super versatile piece of kit.

This listing is for a green press. .

The default for this listing is set to Table Press Only (assembly required). You need a die set to be able to use this machine. You can add a single standard die set with our Press & Die Combo package in this listing for an additional $20 + tax (usually $35 + tax). If you require further dies sets in addition to the one included with this listing, head here. Choose the die set(s) to match the hardware you want to use and you're away.

All die sets for the KAM DK-93 press are the screw-in type and we carry two styles:

  • DK-93 Die Sets - mainly 3rd party die sets made just to fit the DK-93 & similar table presses (19mm base hole / 8mm upper screw thread). No adapter required.
  • ZYT Die Sets - smaller, these were designed originally for the ZYT Hand Pliers and ZYT Mini Press / Standup Pliers. They only work with the KAM DK-93 with the use of an additional adapter in the base. If you choose any die set with ZYT in its title from the dropdown list, make sure you also add on an adapter or your ZYT die sets won't work with the press.


Which die set do I need?

This depends on which type & size of hardware you are looking to set - for most hardware you'll need a different die set for each size.


Tips for choosing die sets:

Tip 1: For grommets, you will need a corresponding sized hole punch to your grommet die, or a maximum of 1mm smaller (non-rigid projects). Your punch can be a die set, hand & hammer punch, plier punch or similar.

Tip 2: For plastic snaps, you may be able to just push the cap posts through thinner fabrics. For more dense materials, you may find an awl or small hole punch (1.5 - 2mm) useful.

Tip 3: For the posts of rivets (double cap, single cap, magnetic snaps), fashion snaps and utility snaps, you will need to make a hole of about 2.5mm. You can do this with either a 2.5mm hole punch (2mm works also), a ZYT awl die or a tapered hand awl.

Tip 4: For Double Cap Rivets, you may use a die set 1-2mm larger than your rivet cap size to successfully set them. E.g. you can set 8mm, 9mm & 10mm DCR with a 10mm die set. Larger rivets cannot be set with a smaller die set.

Tip 5: For Magnetic Rivet Snaps, you may use an 18mm die set to successfully set 14mm snaps.


Need an awl to make holes in your fabric first? Be sure to tick the checkbox above to get the discounted offered on our white, plastic-handled awls.

Looking for other dies sets for the DK93 not listed here? Ask if we have it in stock or can special order for you using the contact form.


Assembly

Your table press will be delivered with the lever arm unattached. When it arrives, the leaver is easily attached by inserting the accompanying bolt through the press body and lever. No tools required.

We're working on getting our own assembly video together to show this. In the meantime, please check out this great video on Youtube:


Please note

  • KAM pliers and table presses are designed to be used with KAM plastic snaps and may not be compatible with other (e.g."Babyville") branded or unbranded plastic snaps.
  • Not all hardware is created equal. We cannot guarantee that our die sets will work with hardware purchased elsewhere. We test all of our die sets with our hardware before they are shipped to make sure they work well together. We will not accept returns of die sets for not setting hardware purchased elsewhere correctly.
  • The manufacturer does not offer a warranty on this table press.
  • The KAM DK-93 is an industrial piece of equipment and as such sometimes exhibits cosmetic flaws (e.g. paint chips, rust spots etc) which do not inhibit the working capabilities of the machine. By making this purchase, you acknowledge this. We will not accept returns for cosmetic flaws.


Show More
You May Also Like
Die Sets (for Table Presses)
Die Sets (for Table Presses)
Die Sets (for Table Presses)
C$35.00
Awl, plastic handle
Awl, plastic handle
Awl, plastic handle
C$2.50
  • My Account
  • Track Orders
  • Wishlist
  • My Bag
Display prices in:CAD
Skip to main content
Quammie Homecrafts
Menu
Home
Store
About
Contact Us
Quammie Homecrafts
Terms & ConditionsPrivacy PolicyShipping & Payment InfoReturn PolicyPrice MatchReport abuse
Made with Ecwid by Lightspeed